BTA Van Rysel XCR TRI Assembly Guide | Aero RocketTT Integration

Guide Montage BTA Van Rysel XCR TRI | Intégration Aero RocketTT

Welcome to the performance ecosystem. Follow these steps to install your BTA mount and optimize your aero cockpit.

🛠️ REQUIRED HARDWARE

  • Screws included:
    • 2x M5 x 20mm screws (Base)
    • 2x M5 x 40mm screws (Upper stack)
    • 2x M5 x 8mm screws (Lower option)
  • Tools: Allen key set (2.5, 3, 4mm recommended).

⚙️ STEP 1: CENTRAL BLOCK ASSEMBLY

Objective: Connect the BTA support plate to the central spacer.

  1. Align the holes in the BTA support plate with the threads in the central spacer.
  2. Securely fasten the assembly using the 2 M5 x 20mm screws, tightening to 4nm
    • 💡 RocketTT Tip: A medium threadlocker (Loctite 243 type) on the screws is recommended for optimal hold against vibrations.

 

💨 STEP 2: UPPER AERO STACK (VFLOW/BTA)

Objective: Integrate the fairing, computer mount / or a 1cm spacer, and the main bottle cage.

  1. Stack the components on the central spacer in the following order:
    • 👉 VFLOW Aero Support (nose cone)
    • 👉 Computer Mount (Garmin/Wahoo spacer) / spacer
    • 👉 Main bottle cage.
  2. Pass the 2 long M5 x 40mm screws through this entire stack. / !\ If you are not using the spacer / Garmin mount, use the M5 x 30mm screws / !\
  3. Screw firmly from the top into the upper threads of the central spacer: Tighten to 4nm

🎒 STEP 3: LOWER OPTION INSTALLATION

Objective: Attach an accessory or a second bottle cage under the spacer.

  1. Position your lower bottle cage (or modular accessory like Spares) directly under the central spacer.
  2. Securely fasten using the 2 short M5 x 8mm screws. Tighten to 4nm

 

🏁 STEP 4: FINAL INSTALLATION ON THE COCKPIT

Objective: Attach the assembled unit to the bike.

  1. Position the complete BTA assembly between your cockpit plate and your arm rests.
  2. Securely fasten using the supplied M5 screws.
    • Note: A kit of M5 screws of various lengths is provided to adapt to the thickness of your specific stack
    • Select the longest possible screw while ensuring a firm tightening without parasitic stops.

Congratulations, your RocketTT cockpit is ready! Check the tightness of all components before your first ride.